Tag Archives: statutory-instrument

VAT: New reverse charge for the construction industry

By   4 February 2019
0

Further to my article which sets out the basis of these changes, I look further at the measures which will be introduced on 1 October 2019. Time is running out for businesses in the building and construction sector to understand the impact of the new rules and to make arrangements to implement the required changes. These will include:

  • cashflow implications
  • accounting procedures
  • processes
  • tax compliance
  • documentation
  • systems

Background

HMRC will introduce the Reverse Charge (RC) to combat Missing Trader Fraud (MTF). The rules avoid suppliers charging and being paid VAT but failing to declare or pay this over to the government. HMRC has identified the building trade as an area where there has been considerable tax leakage in the past. The UK has introduced similar measures in response to criminal threats for mobile telephones, emissions allowances, gas, electricity and electronic communications. A domestic reverse charge only applies to supplies between UK taxable persons therefore unless the customer is registered or liable to be registered for VAT it will not apply.

The RC will make supplies of standard or reduced rated construction services between construction or building businesses subject to the domestic RC, which means that the recipient of the supply will be liable to account for VAT due, instead of the supplier. Consequently, the customer in the construction industry receiving the supply of construction services will be required to pay the VAT directly to HMRC rather than paying it to the supplier. It will be able to reclaim this VAT subject to the normal VAT rules. The RC will apply throughout the supply chain up to the point where the customer receiving the supply is no longer a business that makes supplies of construction services (a so-called end user, see below).

The supplies to which the RC will apply are set out here

Further information on the RC in general, including invoicing requirements are to be found in VAT Notice 735

Technical

As a general rule, it is the supplier of goods or services who is required to account for VAT on those supplies. However, the VAT Act 1994, section 55A requires the recipient, not the supplier, to account for and pay tax on the supply of any goods and services which are of a description specified in an order made by the Treasury for that purpose.

The final version of the draft legislation has now been published. In addition HMRC have issued guidance notes which include a helpful flowchart.

Mixed supplies

If there is a RC element in a supply, then the whole supply will be subject to the RC. This is to make it simpler for both supplier and customer and to avoid the need to apportion the supply.

End user

End users will usually be recipients who use the building or construction services for themselves, rather than sell the services on as part of their business of providing building or construction services.

VAT Returns

Suppliers

Suppliers applying the RC do not enter a figure for output tax in box 1 of the VAT Return, but should enter the value of such sales in box 6.

Customers

Customers must enter the output tax on purchases to which the RC applies in box 1 of the VAT Return, but must not enter the value of such purchases in box 6. They may reclaim the input tax on the RC purchases in box 4 of the VAT Return and include the value of the purchases in box 7, in the normal way.

Implementation

HMRC state that it understands the difficulties businesses may have in implementing the domestic RC and say it will apply a light touch in dealing with related errors that occur in the first six months after introduction.

 Action

It is prudent to check whether you, or your clients’ businesses will be affected by these changes. If so, plans need to be put in place; whether as a supplier or recipient, to ensure that VAT is not charged incorrectly (supplier) and the RC is applied correctly (recipient). It is likely that output tax incorrectly shown on an invoice will be due to HMRC but will not be recoverable by the recipient and the omission of levying the RC will lead to penalties. It will also be helpful for smaller construction providers affected by the RC to examine the impact on their cashflow.

Please contact us if you have any queries or require further information.

VAT: No Deal Brexit – new regulations for “imports”

By   14 January 2019
0

A new Statutory Instrument (SI) SI 2018/1376 has been issued which sets out certain measures to be adopted in the event of a No Deal Brexit in respect of postal packets. A background to VAT and Brexit here

If the UK leaves the EU without a deal it will be unable to treat the movement of goods between EU Member States in the same way as previously. Such a movement of goods now become an import – similar to any other goods currently entering the UK from outside the EU. A guide to imports here

These regulations mean that certain overseas businesses will be required to register in the UK and pay import VAT on a consignment of goods up to the value of £135.

I have summarised below the most salient parts of the SI.

What is a qualifying import?

The regulations state that a “qualifying importation” is made where—

  • A supplier supplies goods for a consideration to a recipient in the course or furtherance of a business carried on by the supplier
  • the supplier is not established in the UK
  • the goods are dispatched from a place outside the United Kingdom to the United Kingdom in a postal packet
  • the value of the contents of the postal packet is £135 or less
  • the postal packet does not contain goods of a class or description subject to any duty of excise

There are two exceptions (there always appear to be exceptions in VAT…)

  • the supplier ensures that a UK-established postal operator has a legally binding obligation to pay any import VAT that is chargeable on that qualifying importation to the Commissioners
  • a non UK-established postal operator has an obligation under an agreement with the Commissioners to pay any import VAT that is chargeable on that qualifying importation.

Requirement to register

A supplier must be registered under the new regulations with effect from the date on which the first qualifying importation is dispatched by the supplier. There is no de minimis limit.

Application for registration

  • a notification of a requirement to be registered and an application to be registered must be made using electronic communications in such form and manner to be specified by HMRC
  • it must provide such information as specified by HMRC

Returns

Returns will be known as “Postal Packet Returns” and will be quarterly and will be due on the first calendar day after the last day of the month next following the end of the period.

Penalties

This being VAT – of course there are penalties for getting wrong.

The penalty for failure to register is a flat rate of £1000.

The SI also contains regulations for others to be jointly and severally liable for that import VAT in certain circumstances. Further, as expected, (see here) the SI also removes Low Value Consignment Relief (LVCR) for the import of commercial goods with a value of £15 or less.

A No Deal Brexit will undoubtedly increase administration, red tape and cause delays and uncertainties, and VAT is only one aspect of that. Let us hope that this SI is not needed…

VAT: Construction industry – the new Reverse Charge

By   11 June 2018
0

Builders will soon be required to charge themselves VAT.

HMRC has published an important new draft Statutory Instrument (SI) for technical consultation with a draft explanatory memorandum and draft tax information and impact note. The new rules are likely to be introduced in the autumn.

This sets out more details of the intended Reverse Charge (RC) for construction services. The draft legislation will make supplies of standard or reduced rated construction services between construction or businesses subject to the domestic RC, which means that the recipient of the supply will be liable to account for VAT due, instead of the supplier.

What supplies does the intended legislation cover?

The RC will apply to, inter alia:

  • construction, alteration, repair, extension, demolition or dismantling of buildings or structures
  • work on; walls, roadworks, electronic communications apparatus, docks and harbours, railways, pipe-lines, reservoirs, water-mains, wells, sewers, or industrial plant
  • installation in any building or structure of systems of heating, lighting, air-conditioning, ventilation, power supply, drainage, sanitation, water supply or fire protection
  • internal cleaning of buildings and structures, so far as carried out in the course of their construction, alteration, repair, extension or restoration
  • painting or decorating the internal or external surfaces of any building or structure
  • services which form an integral part of the services described above, including site clearance, earthmoving, excavation, tunnelling and boring, laying of foundations, erection of scaffolding, site restoration, landscaping and the provision of roadways and other access works.

What is not covered?

These are some supplies which are not covered by the draft SI

  • drilling for, or extraction of, oil or natural gas
  • extraction of minerals and tunnelling or boring, or construction of underground works, for this purpose
  • manufacture of building or engineering components or equipment, materials, plant or machinery, or delivery of any of these things to site
  • manufacture of components for systems of heating, lighting, air-conditioning, ventilation, power supply, drainage, sanitation, water supply or fire protection, or delivery of any of these things to site
  • the professional work of architects or surveyors, or of consultants in building, engineering, interior or exterior decoration or in the laying-out of landscape
  • signwriting and erecting, installing and repairing signboards and advertisements
  • the installation of seating, blinds and shutters or the installation of security.

Please note that neither of the lists above are exhaustive.

Further details

The rules do not apply to supplies to the end user (consumer) eg; retailers and landlords, but rather to other construction businesses which then use them to make a further supply. There are no de minimis limits, but the RC will not apply to associated businesses.

Deadline

Before these new rues come into effect, HMRC have asked for comments before 20 July 2018.

Why the new rules?

Briefly, the SI is intended to avoid Missing Trader Fraud (MTF). The rules avoids suppliers charging and being paid VAT, but failing to declare or pay this over to the government. HMRC has identified the building trade as an area where there has been considerable tax leakage in the past.

Technical

As a general rule, it is the supplier of goods or services who is required to account for VAT on those supplies. However, the VAT Act 1994, section 55A requires the recipient, not the supplier, to account for and pay tax on the supply of any goods and services which are of a description specified in an order made by the Treasury for that purpose.

Action

It is prudent to check whether you, or your clients’ businesses will be affected by the intended SI. If so, plans need to be put in place; whether as a supplier or recipient, to ensure that VAT is not charged incorrectly (supplier) and the RC is applied correctly (recipient). It is likely that output tax incorrectly shown on an invoice will be due to HMRC, but will not be recoverable by the recipient and the omission of levying the RC will lead to penalties.

Please contact us if you have any queries or require further information.